Pinlock 30 Ready: Pre-designed to accept a Pinlock 30 anti-fog film (sold separately), ensuring your vision stays clear even in cold or humid conditions.

Silicon Coated Durability: Features a premium Silicon Coating that significantly enhances scratch resistance, keeping your visor looking new for longer.

Polycarbonate Strength: Made from high-impact polycarbonate, providing excellent protection against road debris, wind, and insects.

Universal Fit: Precision-engineered to be compatible with all sizes of SMK Force helmets, ensuring a perfect, airtight seal every time.

UV Protection: Built-in protection to shield your eyes from harmful ultraviolet rays during long daytime rides.

Technical Specifications

Feature	Detail
Material	High-Grade Polycarbonate
Coating	Silicon-based Scratch Resistant
Fog Protection	Pinlock 30 Ready (Insert not included)
Compatibility	All SMK Force Helmet Sizes
Color	Optically Clear

Rider's Tip: To extend the life of your silicon-coated visor, always clean it with a soft microfiber cloth and mild soap. Avoid using harsh chemicals or paper towels that can micro-scratch the surface over time.

Crystal Clear Vision for Every Ride

Don't let a scratched visor ruin your ride or compromise your safety. The Genuine SMK Force Clear Visor is engineered for riders who demand uncompromising clarity and durability. Whether you’re navigating city traffic at night or touring through foggy mountain passes, this high-grade Polycarbonate visor provides a distortion-free view of the road ahead.

Maintaining your SMK Force Clear Visor is the best way to ensure maximum safety and a crystal-clear view of the road. This guide covers how to install your new visor and keep that silicon coating performing like new.

SMK Force Visor Guide: Installation & Care Tips

A visor is your window to the world. When it gets scratched or foggy, it’s not just annoying—it’s a safety hazard. Here’s how to manage your genuine SMK Force Visor replacement.

1. How to Install Your New Visor?

Replacing the visor on an SMK Force helmet is a tool-free process designed for speed:

Step 1: Raise the current visor to the fully open position.

Step 2: Locate the trigger or release button on the side plates (pivot points).

Step 3: Pull the trigger down/back to release the visor from the locking mechanism.

Step 4: Align the new clear visor with the tracks and press firmly until you hear a "click."

Step 5: Move the visor up and down several times to ensure a smooth, airtight seal.

2. Mastering Anti-Fog with Pinlock 30

Your visor is Pinlock 30 Ready. If you ride in rain or cold weather, adding a Pinlock lens is a game-changer.

The Pins: Notice the two small "pins" on the inside of the visor.

The Seal: The Pinlock lens has a silicon seal that creates a pocket of air, preventing condensation.

Installation: Flex the visor slightly to "flat" and slot the Pinlock lens between the pins. Once the visor returns to its curved shape, the lens is locked in.

3. Cleaning Your Silicon-Coated Visor

Because your visor is Polycarbonate Silicon Coated, it is scratch-resistant, but it isn't "scratch-proof."

Avoid Paper Towels: These are made of wood pulp and will cause micro-scratches.

The Microfiber Rule: Use only clean microfiber cloths.

Soak, Don't Scrub: If you have dried bugs on the visor, lay a wet, warm cloth over it for 2 minutes. The debris will wipe right off without you having to scrub and risk damage.

Quick Maintenance Checklist

Action	Frequency
Light Cleaning	After every ride
Deep Wash	Once a week
Check Pivot Points	Once a month
Replace Visor	If deep scratches appear

Ready to see the road clearly again? The SMK Force Spare Clear Visor is available now with Pinlock 30 compatibility for all helmet sizes.